Introduction
Based on the ‘gravity principle”, the Paper Hanger Series utilizes an aluminum extrusion with internal metal rods to grip and hang paper for display purposes.
The Paper Hanger Series is ideal for notes, messages, architectural plans, displays, posters or boardroom presentations. It can be attached using double-sided foam tape directly to a wall or any other flat / straight surface.
The Paper Hanger Series is available at a maximum length of 74”.
It can be cut down it to any size required. Minimum length is 4”.
CUT SHEETS - Please refer to the bottom of each page for Cut Sheet downloads.
How it works
Paper is easily inserted behind the Paper Hanger’s aluminum rods and is gripped in place through gravity and the grooved surface within the extrusion.
The Paper Hanger can also be used with the Architectural Modular Series.
The Paper Hanger’s 13/16” high extrusion allows for it to be simply attached to the Architectural Modular Series’ 13/16” high Insert with the use of double-sided tape.
- Paper Hanger - How it works PDF document, 69.69KB
Sizes
The Paper Hanger Series’ longest available size is 74”.
Longer lengths can be achieved by butt-joining multiple units, which will only require the black End Caps on the outer ends to secure the rods.
End Caps must be used on outer ends of the Paper Hanger for the system to function.
- Paper Hanger - Size chart PDF document, 64.64KB
Finishes
The Paper Hanger Series’ aluminum extrusion and rods are a clear anodized aluminum finish and the End Caps are black plastic.
The outside area of the Paper Hanger can be painted. However the paint must not make contact with the internal area.
Please contact Systech for more detailed information.
Mounting options
A Paper Hanger can be mounted directly to a wall, a flat surface or a workstation via the use of double sided tape.
Alternatively it can also be mounted directly to an AM Series Sign, as seen above.
The Paper Hanger is 13/16” high and is fixed with double sided tape and sits directly over a 13/16” AM Series Insert if incorporation into an AM Series sign is required.
It can only be attached to the bottom Insert on an AM Series sign.
